Samsung OfficeServ 7000 Series - Page 346

CHAPTER 2. MMC Programming
2-308
© SAMSUNG Electronics Co., Ltd.
ACTION DISPLAY
1)
Press Transfer button and enter 759.
Display shows:
CLI RINGING (001)
CLI:
2) Dial entry number. (e.g., 005)
OR
CLI RINGING (005)
CLI:_
Press Volume button to make a selection and press
Right Soft button to move cursor.
3)
Enter CID number and press Right Soft button to
advance to next entry.
CLI RINGING (005)
CLI:1234567
OR
Enter CID number and press Left Soft button to return
to step 2.
4)
Enter reject option via dial keypad.
(1 for YES, 0 for NO)
CLI RINGING (005)
REJ:NO PRI:NO
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
5)
Enter priority level via dial keypad. (1-9 or NO)
OR
CLI RINGING (005)
REJ:NO PRI:NO
Press Volume button to make selection and press
Right Soft button to move cursor.
6) Enter station or group number for each Ring.
Plan destination via dial keypad. (e.g., 501)
CLI RINGING (005)
R1:501 R2:NONE
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
7)
Dial 1-8 (or NO) to select ring tone. (e.g., 2)
OR
CLI RINGING (005)
TONE:2 CAD:NO
Press Volume button to make selection and press
Right Soft button to move cursor.
8)
Dial 1-5 (or NO) to select ring cadence.
OR
CLI RINGING (005)
TONE:2 CAD:NO
Press Volume button to make selection and press
Right Soft button to move cursor.
9)
Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 312 ALLOW CALLER ID