Samsung OfficeServ 7000 Series - Page 403

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-365
ACTION DISPLAY
1) Press Transfer button and enter 832.
Display shows the outbound and first access code.
(O:00)ACCESS DGT
0
2) Enter 0 for O (outbound) or 1 for I (inbound) code
table.
(O:00)ACCESS DGT
0
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter access code table number (000-250) via dial
keypad.
(O:01)ACCESS DGT
1
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
4) Enter access code item (0-6) via dial keypad.
OR
(O:01)ACCESS DGT
1
Press Volume button to make selection and press
Right Soft button to move cursor.
5) Enter access code data via dial keypad.
OR
(O:01)ACCESS DGT
840
Press Volume button to make selection and press
Right Soft button to save and move cursor.
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 833 VOIP IP TABLE
MMC 834 H.323 OPTIONS
MMC 836 H.323 GATEKEEPER OPTIONS
MMC 837 SIP OPTIONS