Samsung OfficeServ 7000 Series - Page 407

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-369
(Continued)
No Parameter Description Default
19 ALLOW GW CHECK When using a gatekeeper, this permits the H.323
gateway to check for gatekeeper presence.
DISABLE
20 CLIR WITH NUMBER When this option is enabled, the CLIP number is
sent to the network even if the CLIP restriction flag
is set.
DISABLE
21 USE OVERLAP DIAL Enables use of overlap dialing. ENBLOC
DEFAULT DATA
SEE DESCRIPTION
ACTION DISPLAY
1) Press Transfer button and enter 834.
Display shows the first option.
GATEWAY CALL ID
1234
2) Enter H.323 option number (00-20) via dial keypad.
H.323 FAST SETUP
DISABLE
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter H.323 option data via dial keypad.
OR
H.323 FAST SETUP
ENABLE
Press Volume button to make selection and press
Right Soft button to move cursor.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE