Samsung OfficeServ 7000 Series - Page 410

CHAPTER 2. MMC Programming
2-372
© SAMSUNG Electronics Co., Ltd.
(Continued)
No Parameter Description Default
18 TOS/DifServ An 8-bit binary value that will be used by external
routers, switches, etc, (that optionally support TOS-bit
prioritization) to identify the transport-priority value of
data packets generated by the MGI card. This value can
be left at the default value (00000) if your network
infrastructure does not support this method of
bandwidth management.
All bits 0
19 802.1 p/q Each created channel may be given its own Ethernet
header provided that the Comcerto MAC address is
unique. When sending a payload Ethernet frame, each
channel uses its own Ethernet header (if it has one).
This option is enable or disable for 802.1p/q.
(including 802.1 VLAN and 802.1 Priority)
NOTE: These options apply to RTP/RTCP.
Disable
20 802.1 P Set the 802.1 priority. The range is 0~7. 0
21 802.1 VLAN Set the VLAN tag. The range is 0~ 4095. 0
22 G711 FRAME specify the transmission interval time of the VoIP packet
for G.711 codec
20 ms
23 G729 FRAME specify the transmission interval time of the VoIP packet
for G.719 codec
20 ms
24 G729s FRAME specify the transmission interval time of the VoIP packet
for G.729a codec
20 ms
25 G723 FRAME specify the transmission interval time of the VoIP packet
for G.711 codec
30 ms