Samsung OfficeServ 7000 Series - Page 412

CHAPTER 2. MMC Programming
2-374
© SAMSUNG Electronics Co., Ltd.
(Continued)
No Parameter Description Default
15 DTMF TYPE There are two types of DTMF transmission: INBAND,
which is industry standard (H.245) type DTMF transport,
and OUTBAND which is a Samsung proprietary
method.
OUTBAND
16 TOS/DifServ An 8-bit binary value that will be used by external
routers, switches, etc, (that optionally support TOS-bit
prioritization) to identify the transport-priority value of
data packets generated by the MGI card. This value can
be left at the default value (00000) if your network
infrastructure does not support this method of
bandwidth management.
All bits 0
17 G711 FRAME specify the transmission interval time of the VoIP packet
for G.711 codec
20 ms
18 G729 FRAME specify the transmission interval time of the VoIP packet
for G.719 codec
20 ms
19 G729s FRAME specify the transmission interval time of the VoIP packet
for G.729a codec
20 ms
20 G723 FRAME specify the transmission interval time of the VoIP packet
for G.711 codec
30 ms
DEFAULT DATA
SEE DESCRIPTION
ACTION DISPLAY
1) Press Transfer button and enter 835.
Display shows the first option.
MGI6:AUDIO CODEC
G.729
2) Enter MGI type (0-2) via dial keypad.
OR
MGI6:AUDIO CODEC
G.729
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter MGI DSP parameter via dial keypad.
OR
MGI6:G729 FRAME
20 MS
Press Volume button to make selection and press
Right Soft button to move cursor.
4) Enter MGI DSP parameter.
OR
MGI6:G729 FRAME
40 MS
Press Volume button to make selection and press
Right Soft button to save and return to step 3.