Samsung OfficeServ 7000 Series - Page 99

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-61
(Continued)
No Option Default Description
14 ICM EXT FWD OFF When ON, call forward external is allowed when intercom calls
are placed to a station that has Call Forward External
programmed and set.
16 DID ERR TONE OFF This option provides error tone when an invalid DID number
is received.
18 KTS DISC ALM OFF When ON, generates a system alarm when a phone
disconnects or connects.
19 OFF HOOK ALM OFF When ON, generates a system alarm when a phone stays
off-hook longer than this timer.
20 SL SELF RING OFF When ON, generates ring of 10 seconds when a single line
phone dials itself and hangs up (self test).
21 SGR INC BUSY OFF When ON, generates busy tone when all station group
members are busy for a group call. This does not work for
station groups which have Unconditional Ring mode set.
24 TRSF CANCEL OFF When OFF, a single line phone can handle 2 calls
simultaneously using the hook-flash to toggle between them.
When ON, a single line phone can connect to the second
call, but pressing the hook-flash will not toggle between the
two calls it will disconnect the second call and reconnect the
single line phone to the first call.
26 RECALL DISC OFF When ON, the system disconnects a transferred call when it
recalls.
29 ARD TONE CHK ON When system detects CO BUSY TONE from Central Office,
it returns to auto redial state.
30 VPN ENABLE OFF When ON, VPN is enabled. (Australia only.)
31 IN TOLL CHK OFF When OFF, the system doesn’t toll restrict incoming calls.
32 ISDN
PROGCON
OFF When ON, if an outgoing call receives PROGRESS
message from ISDN trunk, the call will connect without
CONNECT message.
33 INCLUDE VAT OFF When ON, an ‘Inclusive VAT of’ line is printed on Hotel
invoices (Hotel Application).
34 LCR DIALTONE OFF This option connects a dial tone different from extension dial
tone when using LCR. When ON, a continuous tone, such
as station dial tone, is generated.
36 DSS KEY DPU OFF When ON, pressing a DS key will pick up the call at a ringing
station
37 BEGN DGT DSP OFF When ON, and an outside call is made via speed dial or LNR
where more than 11 digits are dialed, then only the first 11
dialed digits are shown on the phone display.
38 ONE TCH
FACC
OFF When OFF, phone users cannot use one-touch account
code (ACC) key.