Siemens SIMATIC Ident System Manual

Readers
5.3 SIMATIC RF220R
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
103
5.3.3
RF220R pin assignment with RS422 interface
Pin
Pin
Device end 8-
pin M12
Assignment
1
+ 24 V
2 - Transmit
3
0 V
4
+ Transmit
5
+ Receive
6
- Receive
7
Unassigned
8
Ground (shield)
5.3.4
Display elements of the RF220R reader
Color
Meaning
green
flashing
Operating voltage present, reader not initialized or antenna switched off
permanently
lit
Operating voltage present, reader initialized and antenna switched on
yellow
1)
Transponder present
flashing red Error has occurred, the type of flashing corresponds to the error code in the
table in the section "Error
codes". The optical error display is only reset if the
corresponding reset parameter ("option_1 = 2") is set (see Product infor-
mation "SIMATIC RF200 command set"
(https://support.industry.siemens.com/cs/us/en/view/44864850)).
1)
Only in the "with presence" mode.

Siemens SIMATIC Ident Specifications

General

Brand	Siemens
Model	SIMATIC Ident
Category	Other
Language	English