Transponder
7.4 MDS D124
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
199
Vibration-resistant to EN 60721-3-7, class 7M3
1)
Design, dimensions and weight
Type of mounting
• 1 x M3 screw
2)
≤ 1 Nm
• Glued
• With spacer
The values for shock and vibration are maximum values and must not be applied continuously.
2
) To prevent it loosening during operation, secure the screw with screw locking varnish.
Use of the MDS D124 in hazardous area
The mobile data memory MDS D124, device group II, category 1G or 1D may be installed
and operated in zones 0, 1 and 2 or in the zones 20, 21 and 22.
The following requirements of the 94/9/EC directive are met:
● EN 60079-0:2009
● EN 60079-11:2007
● EN 61241-11:2006
● EN 60079-26:2007
When used in hazardous areas, the MDS D124 must not be operated with field strengths > 5
A / m to avoid impermissible heating. This is not the case with readers from the SIMATIC RF
range (MOBY D, RF200 and RF300).
II 1 G Ex ia IIC T3 to T6 Ga
or
II 1 D Ex ia IIIC T80 °C to T180 °C Da
TÜV 12 ATEX 084413 X
To Next Page
Loading...
Need help?
General