Appendix
A.2 Accessories
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
311
One of the following markings on a device is indicative of the corresponding approval:
Russia, Belarus and Kazakhstan
Antenna splitter
Area of application
Area of application Designed for distributed mounting of
antennas in warehouses, logistics and
Readers that can be connect-
RF290R
Number of connectable
max. 4
Connectable antennas
• ANT D5
• ANT D6
• ANT D10
Degree of protection IP65
The antenna splitter is a power distributor with electrical isolation between the input (IN) and
the two outputs (OUT1, OUT2). At the operating frequency of 13.56 MHz, the impedance at
all inputs and outputs is 50 ohms.
The device is used to connect 2 to 4 antennas to a reader. Gate, C and tunnel arrangements
are therefore possible (see section "Configuration options").
Table A- 1 Ordering data for the antenna splitter
Antenna splitter
(incl. one antenna connecting cable 3.3 m)
6GT2690-0AC00
To Next Page
Loading...
