Siemens SIMATIC Ident System Manual

Introduction
1.1 Abbreviations and naming conventions
SIMATIC RF200
16 System Manual, 07/2015, J31069-D0227-U001-A9-7618
● Operating instructions "RF310M"
(https://support.industry.siemens.com/cs/us/en/view/51812642
)
● Product information "RF200 command set"
(https://support.industry.siemens.com/cs/us/en/view/44864850
)
History
The following issues of the SIMATIC RF200 system manual have been published:
Output
Note
03/2011
First edition
05/2011 Expansion of the documentation with the addition of the device variant RF260R with
RS-232 interface
09/2011
Expansion of the documentation with the device variant RF240R
03/2013 Expansion of the documentation with the device variant RF290R
09/2013 Expansion of the documentation by the following:
• the device variant RF250R
• the device variants RF240R and RF260R with ASCII interface
• Antennas ANT 8, ANT 12, ANT 18 and ANT 30
• Transponders
07/2015 Expansion of the documentation by the following:
• ANT 3 antennas
• MDS D5xx transponder
• Mobile reader RF210R
1.1
Abbreviations and naming conventions
The following terms/abbreviations are used synonymously in this document:
Write/read device (SLG)
Readers
Mobile data storage unit (MDS)
Transponder, tag
Interface module (ASM)
Communications module (CM)

Siemens SIMATIC Ident Specifications

General

Brand	Siemens
Model	SIMATIC Ident
Category	Other
Language	English