Readers
5.7 SIMATIC RF290R
SIMATIC RF200
128 System Manual, 07/2015, J31069-D0227-U001-A9-7618
Design
① RS-422/RS-232 interface, 24 V power supply
② Digital I/O
③ External antenna
④ Operating display, 4 LEDs:
• Power (PWR)
• Active (ACT)
• Present (PRE)
• Error (ERR)
Application Identification tasks in production control and in
intra-logistics, e.g. skid identification, container
management, HF gates (F&B)
When connected via a PC multitag operation is
Note
Reader requires external antennas
Note that the RF290R reader is designed only for operation with external antennas and can
only be operated in
conjunction with the antennas ANT D5, D6 or D10.
Note
Note on operating the reader with ANT D6 / D10
When operating with a power ≥ 3 W, the limits are adhered to according to 2004/40/EC
(minimum requirements concerning the protection of workers). Note
that the antennas may
only be used in an "industrial environment" and not in buildings used by the public.
To Next Page
Loading...
