Readers
5.6 SIMATIC RF260R
SIMATIC RF200
122 System Manual, 07/2015, J31069-D0227-U001-A9-7618
2 - Transmit RXD
Display elements of the RF260R reader
green
Operating voltage present, reader not initialized or antenna switched off
permanently
Operating voltage present, reader initialized and antenna switched on
1)
flashing red Error has occurred, the type of flashing corresponds to the error code in the
table in the section "Error codes". The optical error display is only reset if the
corresponding reset parameter ("option_1 = 2") is set (see Product infor-
mation "SIMATIC RF200 command set"
(https://support.industry.siemens.com/cs/us/en/view/44864850)).
1)
Only in the "with presence" mode.
To Next Page
Loading...
Need help?
General