Siemens SIMATIC Ident - Technical Specifications

Transponder
7.8 MDS D160
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
217
7.8.4
Technical specifications
Table 7- 20 Technical specifications for the MDS D160
6GT2600-0AB10
Product type designation
SIMATIC MDS D160
Memory
Memory configuration
• UID • 8 bytes
• User memory • 112 bytes EEPROM
• OPT memory • 20 bytes EEPROM
Read cycles (at < 40 ℃)
> 10
14
Write cycles (at < 40 ℃)
> 10
6
Data retention time (at < 40 ℃)
> 10 years
Write/read distance (S
g
) Dependent on the reader used, see section "Field
data (Page 37)"
MTBF (Mean Time Between Failures)
2 x 10
6
years
Mechanical specifications
Housing
• Material
• Color
• PPS
• beige
Recommended distance to metal
> 25 mm
Power supply
Inductive, without battery
Permitted ambient conditions
Ambient temperature
• In operation, during write/read access • -25 … +85 °C
• In operation, outside write/read access • -40 … +175 °C
• from +125 ℃: for 1000 hours, 20% reduction
of the limit distance
• from +140 ℃: No processing possible
• at +175 ℃: 100 washing cycles tested
• at +220 ℃: Tested once for up to 30 seconds
• During transportation and storage • -25 to +100 ℃