Siemens SIMATIC Ident System Manual

Appendix
A.2 Accessories
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
319
A.2.2.9
Technical specifications
Technical specifications
Max. write/read distance
ANT ↔ Transponder (S
g
)
See manual for the relevant antenna
Number of channels
• Input channels
• Output channels
• 1
• 6
Impedance
50 ohm
Power supply
24 V (± 10 %)
Current consumption
max. 200 mA
Dimensions (L x W x H)
240 x 150 x 70 mm
Length of the connecting cable
0.4 m
Color
Anthracite
Material
Aluminum die-casting
Plug-in connections
• Power supply: Four-pole M12 / 4 pole round
connector
• Reader antenna connector: Single-pole TNC
socket
• Antenna connections: 6 x TNC socket
Max. power (reader input, or per antenna)
8 W
Shock resistant according to EN 60721-3-7
Class 7M2
Total shock response spectrum Type II
1.5 g
Vibration according to EN 60721-3-7 Class 7M2
1.5 g (5 to 500 Hz)
Securing
4 M5 screws
Tightening torque
(at room temperature)
≤ 5 Nm
Ambient temperature
• During operation
• During transportation and storage
• -20 ℃ ... +55 ℃
• -25 ℃ ... +70 ℃
MTBF
2.5 x 10
6
hours
Degree of protection according to EN 60529 IP65
Weight, approx. 1.8 kg
Approvals CE / FCC / IC

Siemens SIMATIC Ident Specifications

General

Brand	Siemens
Model	SIMATIC Ident
Category	Other
Language	English