Siemens SIMATIC Ident - Mounting on Metal

Transponder
7.17 MDS D423
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
255
7.17.3
Mounting on metal
Mounting on metal
Direct mounting of the MDS D423 on metal is possible.
Figure 7-42 Mounting the MDS D423 on metal
Flush-mounted in metal
It is possible to mount the MDS D423 in metal.
a
≥ 10 mm
Figure 7-43 Flush-mounting of the MDS D423 in metal with 10 mm clearance