Siemens SIMATIC Ident - Dimension Drawing

Transponder
7.5 MDS D126
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
203
6GT2600-0AE00
Permitted ambient conditions
Ambient temperature
• During operation • -25 to +85 ℃
• During transportation and storage • -40 to +125 ℃
Degree of protection to EN 60529 IP68
2 hours, 2 bar, +20 °C
Shock-resistant to EN 60721-3-7 class 7M3
50 g
1)
Vibration-resistant to EN 60721-3-7, class 7M3
20 g
1)
Torsion and bending load
Not permitted
Design, dimensions and weight
Dimensions (Ø x H)
50 x 3.6 mm
Weight
13 g
Type of mounting
• 1 x M4 screw
2)
≤ 1 Nm
• Glued
1)
The values for shock and vibration are maximum values and must not be applied continuously.
2
) To prevent it loosening during operation, secure the screw with screw locking varnish.
7.5.4
Dimension drawing
Dimensions in mm
Figure 7-9 Dimension drawing of MDS D126