Siemens SIMATIC Ident System Manual

RF200 system planning
4.3 Installation guidelines
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
53
Transponder
Reader without direct
metal influence
(Case a, b and d)
Reader flush-
mounted in metal
(Case c)
MDS D522
Special variant
metal-free
100
80
flush-mounted in metal;
distance all round 0 mm
90 40
MDS D524
1)
metal-free
100
60
on metal, distance 15 mm 90 80
flush-mounted in metal;
distance all round 25 mm
85 75
MDS D528
metal-free
100
90
on metal, distance 0 mm
100
80
1)
Mounting the transponder on or in metal is only possible with the appropriate spacer or if there is
adequate clearance to the metal.
2)
Values of > 100 % related to non metal surroundings can occur if transponders were developed
specifically for mounting in/on metallic surroundings.

Siemens SIMATIC Ident Specifications

General

Brand	Siemens
Model	SIMATIC Ident
Category	Other
Language	English