Siemens SIMATIC Ident System Manual

RF200 system planning
4.3 Installation guidelines
SIMATIC RF200
68 System Manual, 07/2015, J31069-D0227-U001-A9-7618
To avoid any influence on the field data, the distance a should be ≥ 150 or 200 mm.
Table 4- 25 Reduction of field data due to metal, range as %: Transponder and RF290R with ANT
D5
Transponder
RF290R with ANT D5
Antenna on metal
(metal plate)
antenna flush-
mounted in metal
(all round 150 mm)
MDS D100
1)
without metal
100
95
on metal, distance 20 mm
65
60
flush-mounted in metal;
distance all round 20 mm
45 40
MDS D124
1)
without metal
100
95
on metal, distance 15 mm
85
80
flush-mounted in metal;
distance all round 25 mm
65 60
MDS D126
1)
without metal
100
95
on metal, distance 25 mm
70
65
flush-mounted in metal;
distance all round 50 mm
55 50
MDS D139
1)
without metal
100
95
on metal, distance 30 mm
90
85
MDS D160
1)
without metal
100
95
on metal, distance 10 mm
70
65
MDS D165
without metal
100
95
on metal, distance 25 mm
65
60
MDS D200
1)
without metal
100
95
on metal, distance 20 mm
65
60
flush-mounted in metal;
distance all round 20 mm
45 40
MDS D261
without metal
100
95
on metal, distance 25 mm 65 60
MDS D324
1)
without metal
100
95
on metal, distance 15 mm 75 70
MDS D339
1)
without metal
100
95
on metal, distance 30 mm
90
85
MDS D400
1)
without metal
100
95
on metal, distance 20 mm
65
60
flush-mounted in metal;
distance all round 20 mm
45 40
MDS D424
1)
without metal
100
95
on metal, distance 15 mm
75
70

Siemens SIMATIC Ident Specifications

General

Brand	Siemens
Model	SIMATIC Ident
Category	Other
Language	English