STONEX R2 User Manual

STONEX R2
204
coordinate data includes point number, Y (Easting), X (Northing), H (Elevation). The
code here, may not be used and to be edited in Codelist Manager.
A: ESTABLISH A NEW COORDINATE DOCUMENT
1 ） Open “Coordinate Editor”, procedure establish a new coordinate document
automatically.
2）Inside dialog input coordinate information, including point number, Y(E coordinate ),
X(N coordinate), H(elevation). As the picture shown below:

STONEX R2 Specifications

General

Brand	STONEX
Model	R2
Category	Measuring Instruments
Language	English