3
Evolution 200 Series Spectrophotometers
Accessories
Thermo Scientific Evolution 200 Series User Guide 119
Rectangular Reference Cell Holder
10 mm Rectangular Sample Cell Holder
This single-cell holder is mounted on the standard baseplate and accommodates standard
10 mm pathlength cells. See Installing a Manual Accessory.
Use the cell lifter to raise the cell for easy removal. This cell holder allows fine adjustment of
the vertical and horizontal position of the cell. This feature is useful for aligning reduced
volume and microcuvettes with the light beam. See z-height.
Related Topics
Rectangular Reference Cell Holder
Sample Position Cell Holders
Reference Cell Holders
Spectrophotometer Z-height
Rectangular Reference Cell Holder
For measurements with a reference sample, install a reference cell holder in the reference
position. See Installing a Reference Cell Holder.
The standard reference holder accommodates rectangular reference cells with these
pathlengths: 10 mm, 20 mm, 40 mm, 50 mm and 100 mm.
Cell lifter and vertical alignment
Horizontal alignment
To Next Page
Loading...
