26
SPE-8W Smart Peltier Linear Cell Changer
394 Evolution 200 Series User Guide Thermo Scientific
Troubleshooting
Related Topics
General Safety Information
Product Description
Preinstallation
Installation
Operation
Maintenance
Problem Possible Cause Solution
Absorbance val-
ues are inconsis-
tent or higher
than expected
The accessory is not
aligned properly
Calibrate and then initialize the cell changer. See
Calibrating the Cell Changer and Initializing the
Cell Changer.
Temperature or
memory failure
Recirculator
malfunction or
incorrect use
NOTICE Immediately turn off the main
power switch and then turn it on again. If the
failure reoccurs, turn off the power and
contact technical support. See Contacting Us.
To Next Page
Loading...
