21
Probe Handling and Maintenance
332 Evolution 200 Series User Guide Thermo Scientific
Handle fiber optic cables gently and follow these precautions:
• Do not drop the cables or knock them against a hard surface.
• Do not bend the cables or tightly coil them.
• Do not touch the end of a fiber optic cable connector.
• Do not overtighten or use tools to tighten the connectors when attaching the cables to the
ports.
• Avoid twisting the cables when attaching them to the connectors.
• Keep a protective cap on each end of the cable when not in use.
Related Topics
Safety Considerations
Installation
Operation
Maintenance
Installation
Install the Integrated Fiber Optic Module before installing a probe.
Languages
WARNING Avoid UV radiation hazard. Do not stare at the beam or light leaving a
coupled fiber optic cable.
AVERTISSEMENT Évitez l'exposition au rayonnements UV. Ne regardez jamais le
faisceau de lumière qui sort d’une fibre optique couplé.
WARNUNG Gefahren durch UV-Strahlung sind zu vermeiden. Nicht in den Strahl eines
gekoppelten Glasfaserkabels blicken.
To Next Page
Loading...
