3
Evolution 200 Series Spectrophotometers
Using the Spectrophotometer
128 Evolution 200 Series User Guide Thermo Scientific
3. If necessary, turn off the spectrophotometer main power switch (on the back panel).
Related Topics
Setting up a Computer Control Instrument
Local Control Instruments
Local Control Instruments
Local Control instruments include a touchscreen and an embedded computer preloaded with
INSIGHT software. Follow these steps to set up a Local Control instrument to run from the
touchscreen or from a remote computer.
All instrument features can be run from the touchscreen or remote computer. Basic operations
such as powering the spectrophotometer on and off, measuring a sample or baseline and
running predefined macros can also be performed from the instrument keypad (see Keypad
Operation).
Related Topics
Setting up a Local Control instrument for touchscreen operation
Setting up a Local Control instrument for remote operation
Turning off a Local Control Instrument
Computer Control Instruments
Setting up a Local Control instrument for touchscreen operation
Y To set up a Local Control instrument (no computer connected to the instrument)
1. Turn on the spectrophotometer main power switch (on the back panel).
2. Press the Power button on the keypad.
Wait for the system to initialize. The power indicator on the keypad stops blinking when
initialization is complete. INSIGHT software starts automatically and appears on the
touchscreen.
Related Topics
Setting up a Local Control instrument for remote operation
Turning off a Local Control Instrument
Tip For routine use, leave the power switch on the instrument back panel in the On
position and use the Power button on the keypad to turn the instrument on and off.
To Next Page
Loading...
