19
TPS-1500W Sealed Peltier Recirculator
310 Evolution 200 Series User Guide Thermo Scientific
7. If the water level alarm occurs again, turn off the power switch, fill the reservoir again and
turn on the power switch.
Related Topics
Acoustic Alarm
Other System Failures
Preinstallation
Installation
Operation
Maintenance
Other System Failures
Related Topics
Acoustic Alarm
Water Level Failure
Preinstallation
Installation
Operation
Maintenance
Note You may need to fill the reservoir several times before the water level alarm resets.
Problem Possible Cause Solution
Temperature or
memory failure
Recirculator
malfunction or
incorrect use
Immediately turn off the main power switch
and then turn it on again. If the failure
reoccurs, turn off the power and contact
technical support. See Contacting Us.
To Next Page
Loading...
