Thermo Scientific Evolution 201 - Calibrating the Cell Changer; Initializing the Cell Changer; Operation

26
SPE-8W Smart Peltier Linear Cell Changer
Thermo Scientific Evolution 200 Series User Guide 379
13. Press and hold the On (center) button on the temperature controller for 2 seconds.
The Normal Mode display shows the current temperature settings.
14. Calibrate the cell changer. See Calibrating the Cell Changer.
15. Set the software parameters to display status monitors and configure the temperature
controller and cell changer for operation. See Operation.
Related Topics
General Safety Information
Product Description
Preinstallation
Operation
Maintenance
Troubleshooting
Operation
Related Topics
General Safety Information
Product Description
Preinstallation
Installation
Maintenance
Troubleshooting
Contents
• Calibrating the Cell Changer
• Initializing the Cell Changer
• Setting the Target Temperature and Stir Speed
• Configuring the Cell Changer
• Measuring Samples with the Cell Changer