26
SPE-8W Smart Peltier Linear Cell Changer
388 Evolution 200 Series User Guide Thermo Scientific
Configure Menu
Diagnostic Menu
•Use the Left and Center buttons to scroll the screen up and down.
•Use the Right button to exit the screen and return to the Main Menu.
Related Topics
Using INSIGHT Software to Set Temperature and Stir Speed
Operation
Configuring the Cell Changer
Related Topics
Calibrating the Cell Changer
Initializing the Cell Changer
Setting the Target Temperature and Stir Speed
Operation
Note A password is required to enter this menu.
NOTICE The Configure menu parameters are set at the factory and cannot be changed
by the user.
Description Measure unit
Cell temperature °C
Radiator temperature °C
Water resistance Kohm
Power %
Cell voltage Volt
Contents
• Cell Changer Settings
• Displaying the Cell Changer Status Monitor
To Next Page
Loading...
