2
INSIGHT Software
Operation
Thermo Scientific Evolution 200 Series User Guide 73
Related Topics
Type Tab for Rate
Measurement Tab for Rate
Instrument Tab for Rate
Accessories Tab for Rate
Samples Tab for Rate
Performing a Kinetics Measurement
Sharing Custom Templates
To share a custom template, paste a copy of it into the desired folder, such as:
C:\Users\Public\Documents\Thermo\Insight\Custom Methods
C:\Documents and Settings\All Users\Documents\Thermo\Insight\Custom
Methods
Feature Description
Calculate rate constants
automatically at end of
data acquisition
Calculates rate constants automatically at the end of the
experiment.
Calculate Rate For each measurement stage, enter the starting and ending times
of the rate vector, the rate scaling factor, and the order of the
reaction. The factor is a constant that is multiplied by a calculated
kinetics parameter to give physical significance to the
measurement.
To enter different settings for individual wavelengths, select
Specify settings for individual wavelengths (available only if
Rate Type on the Type tab is set to Multiple wavelength). In the
Wavelength column, select or type the desired wavelength for each
row of settings. The available wavelengths are those entered on the
Instrument tab.
To delete a row of information from the table, right-click the row
and choose Delete Selected Row. To delete all the information
from the table, right-click it and choose Clear Table.
Note “Shared Documents” may appear in a path instead of “Documents”.
To Next Page
Loading...
