26
SPE-8W Smart Peltier Linear Cell Changer
382 Evolution 200 Series User Guide Thermo Scientific
Setting the Target Temperature and Stir Speed
INSIGHT software can be used to define a target temperature and display a temperature
status monitor. A target temperature can also be set from the temperature controller front
panel.
Related Topics
Calibrating the Cell Changer
Initializing the Cell Changer
Configuring the Cell Changer
Operation
Using INSIGHT Software to Set Temperature and Stir Speed
Related Topics
Using the Peltier Controller to Set Temperature and Stir Speed
Operation
Temperature and Stirrer Settings
In the selected application, use Settings > Accessories > Temperature to display the available
settings for a temperature probe or controller. The Temperature features appear only when the
driver for a temperature probe or controller is installed.
Contents
• Using INSIGHT Software to Set Temperature and Stir Speed
• Using the Peltier Controller to Set Temperature and Stir Speed
Contents
• Temperature and Stirrer Settings
• Configuring a Target Temperature
• Displaying the Temperature Status Monitor
To Next Page
Loading...
