Thermo Scientific Evolution 200 Series User Guide 279
nanoCell
The nanoCell is designed to make small volume measurements of solutions.
The nanoCell has two basic components: the nanoCell accessory that fits in a standard 1 cm
cell holder and the mirrored lid used for the measurement.
Getting Started
This section explains how to measure a sample using the nanoCell.
Y To measure samples with the nanoCell
1. Insert the nanoCell into the sample position single cell holder.
Make sure one of the quartz windows is facing the light beam entering the nanoCell.
Contents
• Getting Started
• Overview
• Introduction to Small Volume Measurements
• Using the nanoCell
• Cleaning the nanoCell
• Pathlength Correction Factors
• Frequently Asked Questions
nanoCell
0.2 mm and 1.0 mm pathlength lids
NOTICE Never submerge any portion of the nanoCell in liquid.
To Next Page
Loading...
