4
Life Science Applications
Proteins and Labels
Thermo Scientific Evolution 200 Series User Guide 175
Samples Tab for Proteins and Labels
Accessories Tab for Proteins and Labels
The status of accessories can be monitored during measurements. See Instrument Status
Monitors.
Related Topics
Type Tab for Proteins and Labels
Measurement Tab for Proteins and Labels
Instrument Tab for Proteins and Labels
Samples Tab for Proteins and Labels
Samples Tab for Proteins and Labels
Related Topics
Type Tab for Proteins and Labels
Click Settings in Proteins and Labels to display the
Accessories tab in the right pane. The available
parameters depend on the installed accessories. See
Accessories for details.
Click Settings in Proteins and Labels to display the
Samples tab in the right pane.
Feature Description
Number of samples Number of samples in the analysis.
Base name Beginning of the name for sample spectra, to which a sequential
number is appended. For example, the names of three sample spectra
using the base name “dye” would be dye1, dye2 and dye3.
Sample averaging Whether and how to average concentration values from multiple
measurements of the same sample or from multiple samples. To
average multiple measurements of the same sample, select Replicate
and set Number of replicates to the total number of measurements.
To average values from two or three samples, select Duplicate or
Tr ip li c at e, respectively.
Use concentration
limits
Displays high and low limit lines on the Run Chart tab to show
whether sample concentrations are within the specified limits.
To Next Page
Loading...
