2
INSIGHT Software
Operation
Thermo Scientific Evolution 200 Series User Guide 41
To roll to the left, click the bottom half.
• Drag between the region markers.
• Click to the left of the left region marker or to the right of the right region marker.
Y To change the display limits by moving the region markers
Drag a region marker left or right.
Y To display the entire spectrum
Double-click between the region markers.
Related Topics
Using the Selection Tool
Using the Spectral Cursor Tool
Using the Peak/Valley Measurement Tool
Using the Peak Area Tool
Using the Region-Threshold Tool
Setting Application Parameters
The tabs in the right pane (and their features) depend on the application.
If appears on a tab, point to it and read the information to correct the problem.
Action buttons for the current application may include:
To set parameters that determine how data will be
acquired or quantified with the current application, click
Settings.
Button Description
Displays data acquisition features for the application and starts an acquisition.
To Next Page
Loading...
