24
Sample Position Cell Holders
342 Evolution 200 Series User Guide Thermo Scientific
Related Topics
Installing a Manual Accessory
Reference Cell Holders
Water Thermostatted 10 mm Rectangular Cell Holder
Cell Holder for 15 mm Beam Height Cells
Cylindrical Cell Holder
Solid Sample Holders
Universal Sample Holder Slide
Rotatable Test Tube and Cell Holder
Sample Holder for 1-Inch Square Cells
Sample Holder for Small Test Tubes and Vials
Variable Pathlength Rectangular Cell Holder
Variable Pathlength Cell Holder Slide
Water Thermostatted 10 mm Rectangular Cell Holder
This is a temperature-controllable version of the rectangular cell holder. Fluids can be
circulated through chambers in the cell holder block, allowing temperature-controlled
measurements in the range between 5 °C and 95 °C (see Installing a Liquid Thermostatted
Accessory). Two ports are provided to connect the cell holder to a recirculating liquid
temperature control device. The connectors accept 1/4-inch internal diameter tubing.
Cell lifter and vertical alignment
Horizontal alignment
To Next Page
Loading...
