Thermo Scientific Evolution 200 Series User Guide 341
Sample Position Cell Holders
This section describes cell holders that can be used in the sample position of your
spectrophotometer. See Installing a Manual Accessory and Installing a Liquid Thermostatted
Accessory for installation instructions.
10 mm Rectangular Cell Holder
This single-cell holder is mounted on the standard baseplate and accommodates standard
10 mm pathlength cells.
Use the cell lifter to raise the cell for easy removal. This cell holder allows fine adjustment of
the vertical and horizontal position of the cell. This feature is useful for aligning reduced
volume and microcuvettes with the light beam.
Contents
• 10 mm Rectangular Cell Holder
• Water Thermostatted 10 mm Rectangular Cell Holder
• Cell Holder for 15 mm Beam Height Cells
• Cylindrical Cell Holder
• Solid Sample Holders
• Universal Sample Holder Slide
• Rotatable Test Tube and Cell Holder
• Sample Holder for 1-Inch Square Cells
• Sample Holder for Small Test Tubes and Vials
• Variable Pathlength Rectangular Cell Holder
• Variable Pathlength Cell Holder Slide
To Next Page
Loading...
