Thermo Scientific Evolution 201 - Fiber Optic Probes; Operating Precautions; VERSA Probe

Thermo Scientific Evolution 200 Series User Guide 443
31
VERSA Probe
The VERSA fiber optic probe uses a standard SMA connector and disposable quartz tips. The
probe is compatible with measurements between 200 and 1100 nm at temperatures up to
125 °C. Quartz tips are available with a pathlength of 10 mm or 20 mm.
Related Topics
Integrated Fiber Optic Module
Probe Handling and Maintenance
Accessories
Operating Precautions
Fiber Optic Probes
Handle probes carefully:
• Do not allow hard materials (glass, metal, ceramic, etc.) to contact the probe’s optical
surfaces.
• Do not drop the probe or knock it against a hard surface.
• Do not subject the probe to rapid or excessive changes in temperature.
Contents
• Operating Precautions
• Installation
• Operation
• Routine Maintenance
Quartz tip
VERSA probe