4
Life Science Applications
Pierce BCA
Thermo Scientific Evolution 200 Series User Guide 185
Accessories Tab for Pierce BCA
The status of accessories can be monitored during measurements. See Instrument Status
Monitors.
Related Topics
Type Tab for Pierce BCA
Measurement Tab for Pierce BCA
Standards Tab for Pierce BCA
Instrument Tab for Pierce BCA
Samples Tab for Pierce BCA
Samples Tab for Pierce BCA
Click Settings in Pierce BCA to display the Accessories
tab in the right pane. The available parameters depend
on the installed accessories. See Accessories for details.
Click Settings in Pierce BCA to display the Samples tab
in the right pane.
Feature Description
Number of samples Number of samples in the analysis.
Base name Beginning of the name for sample spectra, to which a sequential
number is appended. For example, the names of three sample spectra
using the base name “dye” would be dye1, dye2 and dye3.
Sample averaging Whether and how to average concentration values from multiple
measurements of the same sample or from multiple samples. To
average multiple measurements of the same sample, select Replicate
and set Number of replicates to the total number of measurements.
To average values from two or three samples, select Duplicate or
Tr ip li c at e, respectively.
Use concentration
limits
Displays high and low limit lines on the Run Chart tab to show
whether sample concentrations are within the specified limits.
Use weight/volume
correction
If available for the current unit, corrects sample concentrations using
the entered target weight and volume:
corrected concentration = measured concentration * (actual weight /
target weight) * (target volume / actual volume)
To Next Page
Loading...
