29
Temperature Probe
434 Evolution 200 Series User Guide Thermo Scientific
Related Topics
Operating Precautions
Installation
Maintenance
Troubleshooting
Temperature Settings
In the selected application, use Settings > Accessories > Temperature to display the available
settings for a temperature probe or controller. The Temperature features appear only when the
driver for a temperature probe or controller is installed.
Related Topics
Configuring a Target Temperature
Displaying a Temperature Status Monitor
• Temperature Settings
• Configuring a Target Temperature
• Displaying a Temperature Status Monitor
Feature Description
Record temperature with mea-
surement
If a temperature probe is used, records the temperature of
the sample after each measurement. Temperature readings
are stored in the sample properties.
Use temperature controller If a Peltier cell holder or changer is used, defines a setpoint
temperature for the cell block and a stir speed if desired.
The available settings depend on the specifications for the
temperature-controlled accessory.
Start measurements at target
temperature
Starts the measurement when the sample (requires a tem-
perature probe) or cell block (requires a Peltier cell holder
or changer) reaches a specified temperature.
Match probes to cell changer
positions
If a temperature probe is used, maps probe channels 1
through 8 with up to eight cell changer positions. Useful
only when using an automatic cell changer with multiple
temperature probes.
Deselect this to always record the temperature of probe 1.
To Next Page
Loading...
