Thermo Scientific Evolution 201 - Making Proteins and Labels Measurements; Unique Screen Features

4
Life Science Applications
Proteins and Labels
176 Evolution 200 Series User Guide Thermo Scientific
Measurement Tab for Proteins and Labels
Instrument Tab for Proteins and Labels
Accessories Tab for Proteins and Labels
Unique Screen Features
Related Topics
Overview
Dye/Chromophore Editor
Application Settings
Making Proteins and Labels Measurements
Making Proteins and Labels Measurements
While performing this procedure, click here for information about features to the right of the
spectral display.
Y To make a Proteins and Labels measurement
1. Click Measure Proteins & Labels in Proteins and Labels.
The right pane in Measure Protein & Labels includes:
Feature Description
Type Type of analysis to perform.
ε/1000 and Molecular Weight
(kDa)
ε/1000 and molecular weight for the Other protein (ε &
MW) sample type.
Ext. Coeff, ε 1% (L/g-cm) Extinction coefficient and ε 1% for the Other protein (ε
1%) sample type.
Conc. Concentration based on absorbance at 280 nm, after
correction is applied, and the selected extinction
coefficient.
Dye(s) Conc. Concentration of the user-selected dye(s).
Note To start an analysis immediately after viewing or changing the template settings,
click the Measure action button instead and skip to step 3.