Thermo Scientific Evolution 200 Series User Guide 367
SPE-8W Smart Peltier Linear Cell Changer
This accessory includes a thermostatted linear 8-cell changer for 10 mm pathlength square
cuvettes and a Peltier temperature controller that connects to a USB port on the
spectrophotometer or computer. The accessory requires a water pump or recirculator, which
must be purchased separately. Cell temperature can be controlled two ways: from the Peltier
controller front panel or from the spectrophotometer using INSIGHT software. The Peltier
controller may also be used to agitate the sample by placing a magnetic stirrer in the cuvette
and selecting the stir speed.
Contents
Peltier temperature controller Linear cell changer
To Next Page
Loading...
