Thermo Scientific Evolution 201 - Accessories Tab for Pierce 660 Nm Protein Assay; Samples Tab for Pierce 660 Nm Protein Assay

4
Life Science Applications
Pierce 660 nm Protein Assay
218 Evolution 200 Series User Guide Thermo Scientific
Accessories Tab for Pierce 660 nm Protein Assay
The status of accessories can be monitored during measurements. See Instrument Status
Monitors.
Related Topics
Type Tab for Pierce 660 nm Protein Assay
Measurement Tab for Pierce 660 nm Protein Assay
Standards Tab for Pierce 660 nm Protein Assay
Instrument Tab for Pierce 660 nm Protein Assay
Samples Tab for Pierce 660 nm Protein Assay
Samples Tab for Pierce 660 nm Protein Assay
Click Settings in Pierce 660 nm Protein Assay to display
the Accessories tab in the right pane. The available
parameters depend on the installed accessories. See
Accessories for details.
Click Settings in Pierce 660 nm Protein Assay to display
the Samples tab in the right pane.
Feature Description
Number of samples Number of samples in the analysis.
Base name Beginning of the name for sample spectra, to which a sequential
number is appended. For example, the names of three sample spectra
using the base name “dye” would be dye1, dye2 and dye3.
Sample averaging Whether and how to average concentration values from multiple
measurements of the same sample or from multiple samples. To
average multiple measurements of the same sample, select Replicate
and set Number of replicates to the total number of measurements.
To average values from two or three samples, select Duplicate or
Tr ip li c at e, respectively.
Use concentration
limits
Displays high and low limit lines on the Run Chart tab to show
whether sample concentrations are within the specified limits.
Use weight/volume
correction
If available for the current unit, corrects sample concentrations using
the entered target weight and volume:
corrected concentration = measured concentration * (actual weight /
target weight) * (target volume / actual volume)