21
Probe Handling and Maintenance
334 Evolution 200 Series User Guide Thermo Scientific
Installation
Maintenance
Maintenance
Routine Maintenance
Follow these guidelines:
• Clean probes immediately after each measurement and before storing them. Refer to the
cleaning instructions that came with the probe or, if you purchased the probe from us,
follow these steps.
• Follow the manufacturer’s recommendations for probe maintenance. (Check seals and
O-rings regularly for excessive wear, especially from corrosive samples or extreme
temperatures).
Related Topics
Safety Considerations
Operating Precautions
Installation
Operation
Cleaning Probes
Troubleshooting
Cleaning Probes
Clean probes immediately after each measurement and before storing them.
Follow these instructions to clean a probe purchased from us. For recommended agents and
procedures to clean other probes, refer to the manufacturer’s instructions.
Contents
• Routine Maintenance
• Cleaning Probes
NOTICE
• Do not use an ultrasonic bath to clean fiber optic probes.
• Use only recommended cleaning agents.
To Next Page
Loading...
