26
SPE-8W Smart Peltier Linear Cell Changer
374 Evolution 200 Series User Guide Thermo Scientific
Related Topics
System Connections
External Connections
Temperature Controller Front and Rear Panel
Preinstallation
Review this section before installing the accessory.
Related Topics
General Safety Information
Product Description
Installation
Operation
Maintenance
Troubleshooting
Verifying the Power Supply and Fuse
For operation at 120 V, configure the voltage selector on the Peltier back panel and insert the
correct fuse as described in the following table.
Adjustment for frequency change between 50 and 60 Hz is not necessary.
Contents
• Verifying the Power Supply and Fuse
• Changing the Voltage Setting or Fuse
NOTICE The unit is factory set to operate at 220 V.
Power Supply Type of fuse - 250 V
240 V T 1A, Slo Blo
120 V T 2A, Slo Blo
To Next Page
Loading...
