29
Temperature Probe
Thermo Scientific Evolution 200 Series User Guide 431
Temperature Probe
The Temperature Probe allows measurements with the following specifications:
• Range: 0°C to 100°C
• Accuracy: ±0.5 °C + 0.2% of the temperature reading
The kit includes a probe, two Teflon® stoppers, a multi-channel USB interface and a software
driver. The probe has a 304 stainless-steel tip that resists many chemicals. A square stopper
accommodates standard 10 mm pathlength rectangular cuvettes with square lids, and a round
one fits cuvettes with stoppers.
Related Topics
Accessories
Operating Precautions
Handle the accessory carefully:
• Do not allow moisture to leak into the accessory.
• Allow liquid to contact only the narrow measurement tip; do not submerge the probe.
• Wipe off spilled chemicals immediately.
Contents
• Operating Precautions
• Installation
• Operation
• Maintenance
• Troubleshooting
Probe
Stoppers
USB interface
To Next Page
Loading...
