20
Peltier Thermostatted Single Cell Holder
Thermo Scientific Evolution 200 Series User Guide 321
10. Replace the sample compartment front panel. See Sample Compartment Front Panel.
11. Close the sample compartment cover.
12. Turn on the power switch on the controller back panel.
13. Press and hold the On (center) button on the temperature controller for 2 seconds.
The Normal Mode display shows the current temperature settings.
14. Set the software parameters to configure the temperature controller for operation. See
Operation.
Related Topics
General Safety Information
Product Description
Preinstallation
Operation
Maintenance
Troubleshooting
Operation
Contents
• Setting the Target Temperature and Stir Speed
• Measuring Samples
To Next Page
Loading...
