25
Smart Linear 8-Cell Changer
356 Evolution 200 Series User Guide Thermo Scientific
5. Replace the sample compartment front panel.
6. Close the sample compartment door.
7. Click OK to initialize the accessory.
Initialization reads information about the accessory and moves it to position 1.
8. To use a temperature probe with the cell changer, see “Temperature Probe”.
9. To connect a fluid recirculator or other device to control sample temperature on a
thermostatted cell changer, see “Installing a Thermostatted Accessory.”
10. Calibrate the cell changer (linear cell changers only) and set the software parameters to
display the cell changer status monitor and configure the accessory for operation.
Related Topics
Opening and Closing the Sample and Reference Compartment Doors
Removable Panels
Installing a Smart Accessory
Installing a Liquid Thermostatted Accessory
Temperature Probe
Replacing the Cell Holder
Calibrating the Cell Changer
Cell Changer Settings
Displaying the Cell Changer Status Monitor
Installation
Replacing the Cell Holder
Y To remove the cell holder
1. Loosen the two locking screws.
PRECAUCIÓN Evite riesgos de atrapamiento. Mantenga manos y objetos lejos del
alcance del accesorio durante la inicialización.
To Next Page
Loading...
