25
Smart Linear 8-Cell Changer
Thermo Scientific Evolution 200 Series User Guide 357
2. Lift the cell holder off the base.
Y To install the cell holder
1. Line up the cell holder with the two alignment pins on the cell changer base.
2. Hand tighten the two locking screws.
3. Initialize the accessory. See Initializing the Cell Changer
.
Related Topics
Installing a Smart Cell Changer
Installation
Operation
Related Topics
Safety Considerations
Operating Precautions
Locking screw
Locking screw
Cell holder
Base
Contents
• Calibrating the Cell Changer
• Initializing the Cell Changer
• Cell Changer Settings
• Measuring Samples with the Cell Changer
• Displaying the Cell Changer Status Monitor
To Next Page
Loading...
