Thermo Scientific Evolution 201 - Page 375

25
Smart Linear 8-Cell Changer
Thermo Scientific Evolution 200 Series User Guide 361
Measuring Samples with the Cell Changer
The cell changer performs automated measurements based on the sample list.
Languages
Y To measure samples with the cell changer
3. Click Home and click an application such as Fixed or Scan.
4. Choose Settings > Accessories> Cell Changer.
5. Under Available Cells, select the check boxes for the cells that will be used in the cell
changer.
To skip a cell changer position, deselect its check box.
6. Set the other measurement parameters as desired. See the Settings tab for the selected
application.
7. To measure a blank without using the sample list, click Measure Fixed and then click
Zero (or Measure Scan and then Baseline).
The Loading Guide shows one entry for the blank measurement.
CAUTION Avoid pinch hazard. Keep hands and objects clear of the accessory during oper-
ation.
Remarque Évitez les risques de pincement. Éloignez les mains et les objets de l’accessoire
pendant son fonctionnement.
Anmerkung Quetschungen sind zu vermeiden. Hände und Objekte sind während des
Betriebs vom Zubehör fern zu halten.
N.B. Evitare il rischio di pizzicamento.Tenere mani e oggetti lontano dall’accessorio
durante l’operazione.
Nota Evite riesgos de atrapamiento. Mantenga manos y objetos alejados del accesorio
durante el funcionamiento.
CAUTION
Note Position 1 can not be deselected.