19
TPS-1500W Sealed Peltier Recirculator
Thermo Scientific Evolution 200 Series User Guide 307
Related Topics
Routine Maintenance
Filling the Reservoir
Preinstallation
Installation
Operation
Troubleshooting
Filling the Reservoir
Fill the reservoir after connecting an accessory to the recirculator and after a water level alarm.
Use distilled water only.
Y To fill the reservoir
1. Open the vent by turning the control ring counterclockwise. Place a container under the
vent opening to catch drips.
2. Fill the supplied bottle with distilled water.
The bottle lid has a tube with a quick connect fitting.
To Next Page
Loading...
