3
Evolution 200 Series Spectrophotometers
Accessories
124 Evolution 200 Series User Guide Thermo Scientific
5. Replace the sample compartment front panel. See Sample Compartment Front Panel.
6. Close the sample compartment door. See Opening and Closing the Sample and Reference
Compartment Doors.
7. Click OK to initialize the accessory.
Initialization reads information about the accessory and, for cell changers, moves it to
position 1.
For operating instructions and installation details, see the accessory name under Accessories.
Y To remove a Smart Accessory
1. Open the sample compartment door. See Opening and Closing the Sample and
Reference Compartment Doors.
2. Remove the sample compartment front panel. See Sample Compartment Front Panel.
3. Grasp the handles and pull the accessory up and out of the sample compartment.
The software confirms the accessory has been removed.
4. Replace the sample compartment front panel. See Sample Compartment Front Panel.
5. Close the sample compartment door. See Opening and Closing the Sample and Reference
Compartment Doors.
Related Topics
Installing a Liquid Thermostatted Accessory
Installing a Manual Accessory
Installing a Reference Cell Holder
Installing a Liquid Thermostatted Accessory
A liquid thermostatted accessory has ports and internal chambers for circulating fluids
through the unit for temperature-controlled measurements. Other accessories circulate fluids
to cool heated components.
The Recirculator Tubing Kit provides parts for connecting an accessory to a fluid recirculator.
Y To install a thermostatted accessory
1. Install the accessory.
See Installing a Manual Accessory or Installing a Smart Accessory.
2. Remove the tubing access panel. See Tubing Access Panel.
To Next Page
Loading...
