Thermo Scientific Evolution 201 - Setting the Target Temperature and Stir Speed; Using INSIGHT Software to Set Temperature and Stir Speed; Using the Peltier Controller to Set Temperature and Stir Speed

20
Peltier Thermostatted Single Cell Holder
322 Evolution 200 Series User Guide Thermo Scientific
Setting the Target Temperature and Stir Speed
INSIGHT software can be used to define a target temperature and display a temperature
status monitor. A target temperature can also be set from the temperature controller front
panel.
Related Topics
Using the Peltier Controller to Set Temperature and Stir Speed
Measuring Samples
Using INSIGHT Software to Set Temperature and Stir Speed
Temperature and Stir Speed Settings
In the selected application, use Settings > Accessories > Temperature to display the available
settings for a temperature probe or controller. The Temperature features appear only when the
driver for a temperature probe or controller is installed.
Contents
• Using INSIGHT Software to Set Temperature and Stir Speed
• Using the Peltier Controller to Set Temperature and Stir Speed
Contents
• Temperature and Stir Speed Settings
• Configuring a Target Temperature
• Displaying the Temperature Status Monitor
Feature Description
Record temperature with mea-
surement
If a temperature probe is used, records the temperature of
the sample after each measurement. Temperature readings
are stored in the sample properties.
Use temperature controller If a Peltier cell holder or changer is used, defines a setpoint
temperature for the cell block and a stir speed if desired.
The available settings depend on the specifications for the
temperature-controlled accessory.