21
Probe Handling and Maintenance
Thermo Scientific Evolution 200 Series User Guide 335
Y To clean a probe purchased from us
1. Dampen lens paper or a soft cotton swab with one of the following agents:
•Methanol
•Isopropyl alcohol
• Deionized water (can leave spots that affect performance).
2. Using minimal pressure, wipe the probe optics and shaft with the dampened lens paper or
swab.
To remove stubborn materials, use a small amount of acetone.
Related Topics
Safety Considerations
Operating Precautions
Installation
Operation
Routine Maintenance
Troubleshooting
NOTICE Do not soak the lens paper or swab with the cleaning agent. This may leave
pools of liquid that do not dry properly.
To Next Page
Loading...
